 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction IFeatures * Small in size * For reflow soldering * RoHS directive compliant IRecommended Applications * General purpose (Coupling, By-pass) IExplanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C W U Rated voltage Nominal capacitance C Cap. Tol. Suffix J 5 % K 10 % Suffix Product code Dielectric & construction 1C 16 VDC 1H 50 VDC 1 100 VDC 2 250 VDC 9 V Tape width 12 mm 16 mm ISpecifications Category temp.range (Including temperature-rise on unit surface) Rated voltage 16 VDC, 50 VDC : -55 C to +105 C 100 VDC, 250 VDC : -55 C to +125 C 16 VDC, 50 VDC, 100 VDC, 250 VDC (100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/C more than 85 C) 16 VDC Capacitance range 50 VDC 100 VDC 250 VDC Capacitance tolerance 16 VDC, 50 VDC 100 VDC 0.12 F to 0.47 F (E12) 0.056 F to 0.22 F (E12) 0.012 F to 1.0 F (E12) 0.0010 F to 0.12 F (E12) 5 %(J) > 5 %(J), 10 %(K) (C=0.18 F : 10 %(K)only) Withstand voltage Dissipation factor (tan ) 5 %(J), 10 %(K) 250 VDC Between terminals: Rated volt. (VDC)150 % 60 s tan <1.0 %(20 C, 1 kHz) = C<0.33 F = > 16 VDC : IR=3000 M * (20 C,10 VDC, 60 s) > 50 VDC : IR=3000 M * (20 C,50 VDC, 60 s) > 100 VDC, 250 VDC : IR=3000 M * (20 C,100 VDC, 60 s) > 16 VDC : IR=1000 M * F (20 C,10 VDC, 60 s) > 100 VDC : IR=1000 M * F (20 C,100 VDC, 60 s) Insulation resistance (IR) C>0.33 F Soldering conditions Reflow soldering : 240 C max. and 60 s max. at more than 220 C (Temp. at cap. surface) (Please consult us for Reflow 250 C max. product.) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Please consult us for capacitance range between 0.15 F and 1.0 F for 250 VDC type. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors IConstruction IDimensions in mm (not to scale) Size code E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X V L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.7 9.8 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.5 6.3 H 1.4 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 Refer to the column "Rating, Dimensions & Quantity". ITaping Specification for Automatic Mounting Refer to the page of taping specifications. I Rating, Dimensions & Quantity/Reel GCapacitance tolerance : 5 % (J) Cap. (F) 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 Rated volt. 16 VDC Rated volt. 50 VDC Part No Dimensions (mm) L W H Size code Q'ty Part No ECWU1H563JC9 ECWU1H683JC9 ECWU1H823JC9 ECWU1H104JC9 ECWU1H124JC9 ECWU1H154JC9 ECWU1H184JC9 ECWU1H224JC9 Dimensions (mm) Please use 16 VDC rating of ECHU(X) ECWU1C124JC9 ECWU1C154JC9 ECWU1C184JC9 ECWU1C224JC9 ECWU1C274JC9 ECWU1C334JC9 ECWU1C394JC9 ECWU1C474JC9 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 1.4 2.0 2.0 2.4 1.8 2.0 2.4 2.8 E1 E2 E2 E3a D1 D2 D3 D4 3000 2000 3000 L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 Size code Q'ty E2 E2 E3a E3 D1 D2 D3 D4 3000 2000 3000 2000 Cap.<0.047 F : Please use 50 VDC rating of ECHU(X) = 2000 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors I Rating, Dimensions & Quantity/Reel GCapacitance tolerance : 5 % (J), 10 % (K) Cap. (F) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Rated volt. 100 VDC Part No Dimensions (mm) Rated volt. 250 VDC Size code Q'ty L W H Part No ECWU2102 ECWU2122 ECWU2152 ECWU2182 ECWU2222 ECWU2272 ECWU2332 ECWU2392 ECWU2472 ECWU2562 ECWU2682 ECWU2822 ECWU2103 ECWU2123 ECWU2153 ECWU2183 ECWU2223 ECWU2273 ECWU2333 ECWU2393 ECWU2473 ECWU2563 ECWU2683 ECWU2823 ECWU2104 ECWU2124 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 C9 Dimensions (mm) Please use 100 VDC rating ECWU(X) ECWU1123 C9 ECWU1153 C9 ECWU1183 C9 ECWU1223 C9 ECWU1273 C9 ECWU1333 C9 ECWU1393 C9 ECWU1473 C9 ECWU1563 C9 ECWU1683 C9 ECWU1823 C9 ECWU1104 C9 ECWU1124 C9 ECWU1154 C9 ECWU1184KC9 ECWU1224KC9 ECWU1274KC9 ECWU1334KC9 ECWU1394KCV ECWU1474KCV ECWU1564KCV ECWU1684KCV ECWU1824KCV ECWU1105KCV 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.7 7.7 9.8 9.8 9.8 9.8 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 5.0 5.0 5.0 5.0 5.5 5.5 6.3 6.3 6.3 6.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.4 2.8 2.0 2.4 2.9 3.5 3.4 4.0 3.0 3.6 4.3 5.1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D1 D3 D4 Z Z Z Z X X V V V V 3000 2000 3000 2000 L 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 5.0 5.0 H 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 2.0 2.4 2.8 3.2 3.2 3.8 4.5 Size code Q'ty E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B B B 3000 2000 3000 2000 1500 Cap. tol. code 1500 1000 Cap. tol. code IRecommened for Land Dimensions (mm) Land dimensions for reflow soldering A B C Size code E1,E2,E3a,E3 D1,D2,D3,D4,D5 B Z X V 2.6 3.8 3.8 4.5 5.1 7.2 6.6 7.8 7.8 9.0 9.7 11.9 3.0 3.8 4.6 4.6 5.0 5.7 It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when "Recommender for Land dimensions" is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. |
Price & Availability of ECWU1H154JC9
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |